What does an RV furnace sail switch do?
First of all, what is a sail switch? A sail switch for RV furnace is a component commonly found in RV furnaces that helps regulate the flow of air and ensures the proper operation of the furnace’s combustion process. A malfunctioning sail switch in an RV furnace can potentially pose health risks to the passengers. Here’s some key information about the sail switch in an RV furnace:

Sail Switch Function
The sail switch is connected to the blower motor of the RV furnace. Its purpose is to detect the airflow generated by the blower motor. When the blower motor starts and reaches a sufficient airflow, the sail switch activates and allows the furnace’s ignition sequence to continue.
Sail Switch Operation
The sail switch consists of a small, hinged metal plate or “sail” that is positioned in the path of the blower motor’s airflow. When the blower motor starts, it creates airflow that pushes against the sail. Once the airflow reaches a certain level, the sail is lifted, activating the switch and allowing the furnace to proceed with the ignition process.
Sail Switch Safety Feature
The sail switch serves as a safety feature in the furnace system. It ensures that there is sufficient airflow before the ignition process begins. If there is insufficient airflow, it may indicate a blocked vent or other issues that could lead to improper combustion or the production of carbon monoxide. In such cases, the sail switch prevents the furnace from igniting, ensuring the safety of the occupants.
Sail Switch Troubleshooting
If the sail switch fails or becomes stuck in the closed position, the furnace may not ignite or may shut off shortly after ignition. This can be due to a variety of reasons, such as a dirty sail switch, a malfunctioning blower motor, or an airflow obstruction. It’s recommended to consult the furnace’s user manual or seek professional assistance to diagnose and resolve sail switch-related issues.
Proper maintenance and regular inspection of the sail switch, along with the entire furnace system, are important for safe and reliable operation. If you suspect any issues with the sail switch or the RV furnace, it’s best to have it inspected and repaired by a qualified RV technician.
How Do You Test A Sail Switch On A RV Furnace?
To test a sail switch on an RV furnace, you can follow these steps:

Safety Precautions
Before performing any tests, ensure that the RV furnace is turned off and that the propane supply is disconnected to prevent accidental ignition.
Access the Furnace
Locate the access panel of the RV furnace. This panel is typically located on the exterior of the RV or inside a cabinet or compartment.
Locate the Sail Switch
Once you have accessed the furnace, locate the sail switch. It is usually positioned near the blower motor assembly and will have wires connected to it.
Visual Inspection
Inspect the sail switch for any obvious signs of damage, such as broken wires or a stuck sail. Clean any accumulated dust or debris from the sail switch using a soft brush or compressed air.

replace sail switch on RV furnace
Test Continuity
Using a multimeter set to the continuity or resistance mode, test the sail switch for continuity. Disconnect the wires from the sail switch terminals and place the multimeter probes on the terminals. If the multimeter shows continuity or a low resistance reading, it indicates that the sail switch is functioning properly. If there is no continuity or a high resistance reading, the sail switch may be faulty and requires replacement.
Check Sail Movement
Manually move the sail of the sail switch and observe its movement. The sail should move freely and smoothly. If it is stuck or difficult to move, it may indicate a problem with the switch.
Reconnect and Test
Once the sail switch has been inspected and tested, reconnect the wires to their respective terminals. Restore the propane supply and turn on the furnace. Observe the furnace’s ignition sequence and ensure that the sail switch is properly activated when the blower motor starts.